360° Degree Jib Cranes | Order A Bespoke Pelloby Rotating Jib Crane

Using a modified post jib design, Pelloby’s 360° rotating jib cranes provide complete lifting access in a full circular radius.

#soliloquy-container-306{opacity:1}#soliloquy-container-306 li > .soliloquy-caption{display:none}#soliloquy-container-306 li:first-child > .soliloquy-caption{display:block} 360 Degree Power Slew Jib Cranes

Two Pelloby Post Jib Cranes with Anti Clash Sensors

Our 360° degree jib cranes can utilise manual or motorised slewing operation and can be built to support loads of up to the region of 10 tonnes.

Each one is produced to order and custom designed to best suit your application and we are able to offer our standard four year extended warranty with all our 360 jib cranes.

360° power slew jib cranes

Our 360° rotating jib cranes are similar in design to our post jibs which typically have maximum slewing angles of up to 270°, but the top of the post and the jib arm use a slightly different configuration in order to achieve a larger slewing angle.

This enhanced slewing radius makes them suitable for number of applications that other jibs aren’t suitable for, for example harbour based requirements where the arm reaches over water and slews back over the dockside. Our 360° power slew jib cranes are particularly suited to these kinds of tasks.

Fixing a 360° rotating jib crane to the floor is done with either resin anchor bolts that are tailored to suit the size and span of the jib, or (in the event that the floor isn’t off a suitable thickness or quality) foundation bolts that are drilled into a concrete block.

Use the drop-down menu below to learn more about our various jib models:

Pelloby Jib Crane Models

View key info on each Pelloby jib model at a glance then click through to receive a bespoke quote tailored to your application.
Our overbraced post jib range (also known as 220 jibs) are typically used for lighter lifting applications and limited slewing angles, but as with any Pelloby crane, our overbraced jibs can be tailored to suit your precise requirements.

Max Height of Lift (HL): Any
Max Radius/Reach (R): Any
Max Safe Working Load: 5 Tonnes
Max Slewing Angle: 270°
Slewing Operation Options: Manual, Motorised
Articulated/Knuckle Arm: Unavailable
Paint Finishes Available: Any
Floor Fixings Available: Holding Down Bolts, Resin Anchor Bolts (suitable concrete thickness required)
We typically specify underbraced post jibs (also known as 270 jibs) for heavier duty lifting applications. Our underbraced jibs also save on headroom - perfect for maximising the height of lift in locations with overhead obstructions. As with any Pelloby crane, our underbraced jibs can be tailored to your precise requirements.

Max Height of Lift (HL): Any
Max Radius/Reach (R): Any
Max Safe Working Load: 10 Tonnes
Max Slewing Angle: 270°
Slewing Operation Options: Manual, Motorised
Articulated/Knuckle Arm: Available
Paint Finishes Available: Any
Floor Fixings Available: Holding Down Bolts, Resin Anchor Bolts (suitable concrete thickness required)
Our 360° jibs offer complete circular slewing access. Using a slight alteration of our underbraced post jib design, these systems provide either manually operated or motorised continuous rotation. We typically specify this model of jib for any slewing angle requirement that's greater than 270°.

Max Height of Lift (HL): Any
Max Radius/Reach (R): Any
Max Safe Working Load: 10 Tonnes
Max Slewing Angle: 360°
Slewing Operation Options: Manual, Motorised
Articulated/Knuckle Arm: Unavailable
Paint Finishes Available: Any
Floor Fixings Available: Holding Down Bolts, Resin Anchor Bolts (suitable concrete thickness required)
Wall jibs are attached directly to a column or wall, removing the need for (and cost of) the jib post. We offer both overbraced and underbraced wall jibs cranes (underbraced shown above).

As with our post jibs we would typically specify an overbraced wall jib for lighter applications and recommend an underbraced model for heavier loads or when maximising headroom is important. But as ever we can tailor any wall mounted jib crane to meet your precise requirements.

Max Height of Lift (HL): Any
Max Radius/Reach (R): Any
Max Safe Working Load: 10 Tonnes
Max Slewing Angle: Typically 180° (but can be as much as 270° if attached to column instead of a wall)
Slewing Operation Options: Manual, Motorised
Articulated/Knuckle Arm: Available (underbraced models only)
Paint Finishes Available: Any
Wall Fixings Available: Face fixing bolts, Wrap-around stay bolts (columns only, no drilling into building walls or columns required)
Knuckle jibs utilise an articulated arm and are typically used for reaching around obstacles within a workplace. We offer both wall and post mounted knuckle jibs (post mounted shown above), but both are only available with underbraced designs.

Max Height of Lift (HL): Any
Max Radius/Reach (Ra+Rb): 3 metres
Max Safe Working Load: 1 Tonne
Max Slewing Angle: 270°
Available On Which Jib Models: Post Jibs, Wall Jibs
Available With Which Bracing Types: Underbraced Only
Slewing Operation Options: Manual, Motorised
Paint Finishes Available: Any
Floor Fixings Available: Holding Down Bolts, Resin Anchor Bolts (suitable concrete thickness required)
Our travelling jibs run up and down wall mounted gantry rails allowing them to cover a larger lifting area. We offer both manual and powered travel motions on these modified wall jib cranes.

We offer fixed arm designs or 180° slewing angles on standard models, but can also produce special 360° designs. As ever we can tailor any travelling jib crane to meet your precise requirements.

Max Height of Lift (HL): Any
Max Radius/Reach (R): Any
Max Safe Working Load: 10 Tonnes
Max Slewing Angle: Typically fixed or 180° (but can be as much as 360° on special designs.)
Slewing Operation Options: Manual, Motorised
Long Travel Distance: Any
Paint Finishes Available: Any
Phone
This field is for validation purposes and should be left unchanged.

Meeting your 360° degree jib crane requirements

We use the latest in computerised design technology to render drawings as quickly as possible to ensure a quick and accurate quotation for our 360° degree jib crane solutions. Having supplied rotating jib cranes in multiple industries for almost five decades, we are used to adapting our designs to fit particular challenges which may be unique to your business or sector. For example we can provide various optional extras such as parking locks for added workplace safety, hoist canopies for outdoor use, galvanised finishes for longer lasting protection to the system, spark resistant design and a choice of paint options.

Although 360° degree jib cranes offer the maximum possible slewing angle, the full rotation isn’t always required to fulfil your application. If an obstacle is present that makes the installation of a 360° degree jib crane impractical, slewing stops or laser scanners and sensors can be added to ensure the jib’s arm doesn’t come into contact with anything else.

Whatever your lifting requirements, Pelloby’s 360° rotating jibs can be tailored to suit the task in hand.

Email us at sales@pelloby.com or call our team today on 01952 586626 to receive a free quotation for one of our 360° degree jib cranes.

Pelloby Jib Crane Brochure

Click the image on the right to view our jib brochure for an overview of our design and manufacturing capabilities in this area.

This brand new brochure outlines the types of jibs available and the follow up support offered by our service department.