Wall Jib Cranes | Standard & Bespoke Wall Mounted Jib Cranes

By attaching the jib arm directly to a wall or column instead of a post, wall jib cranes are a very cost effective lifting solution.

#soliloquy-container-333{opacity:1}#soliloquy-container-333 li > .soliloquy-caption{display:none}#soliloquy-container-333 li:first-child > .soliloquy-caption{display:block} Wall Jib Crane

Pelloby Wall Jib Crane - Outdoor Application

Pelloby are a leading manufacturer of wall mounted jib cranes, with each tailor made to the application in hand. We’ve produced countless wall jib cranes for various industries and different workplaces over the years.

Whether you’re an end user requiring a low-cost lifting tool for individual workstations for your business or are already involved in the lifting equipment trade, Pelloby have the design and manufacturing expertise to create a wall jib crane that will fully meet your requirements.

We offer a four year extended warranty on all wall jib cranes and very fast delivery times are also available for standard models – contact our team today to find out more.

Wall jib crane slewing & capacity options

The typical maximum slewing angle of a wall jib crane is 180°, however, this can be increased if the jib is mounted on a column to around 270°. We can also introduce a stop to limit this slewing angle to avoid obstacles in your workplace.

The slewing motion of a wall mounted jib crane can be operated manually or powered by either an electric or air motor. The same options are available when it comes to the travel and vertical motions of the hoist and we provide all the electrics required.

Our wall jib cranes are available in a wide range of duty ratings catering for anything from small loads up to 10 tonne capacities, and offering a maximum radius of up to 15 meters. A lifting capacity of about 10 tonnes is normally about as large as wall jib cranes tend to go before another type of crane system might become a better option.

For loads of less than five tonnes we’ll typically specify an overbraced wall jib design, whereas underbraced wall jib cranes tend to be used for higher capacities. There are exceptions to this though, for example an underbraced wall jib crane model might be use when headroom is limited as overbraced systems tend to need more space above the arm. We also offer wall jib cranes with articulated arms (for which an underbraced design will be used).

Learn more about each jib model Pelloby offers using the drop-down menu below:

Pelloby Jib Crane Models

View key info on each Pelloby jib model at a glance then click through to receive a bespoke quote tailored to your application.
Our overbraced post jib range (also known as 220 jibs) are typically used for lighter lifting applications and limited slewing angles, but as with any Pelloby crane, our overbraced jibs can be tailored to suit your precise requirements.

Max Height of Lift (HL): Any
Max Radius/Reach (R): Any
Max Safe Working Load: 5 Tonnes
Max Slewing Angle: 270°
Slewing Operation Options: Manual, Motorised
Articulated/Knuckle Arm: Unavailable
Paint Finishes Available: Any
Floor Fixings Available: Holding Down Bolts, Resin Anchor Bolts (suitable concrete thickness required)
We typically specify underbraced post jibs (also known as 270 jibs) for heavier duty lifting applications. Our underbraced jibs also save on headroom - perfect for maximising the height of lift in locations with overhead obstructions. As with any Pelloby crane, our underbraced jibs can be tailored to your precise requirements.

Max Height of Lift (HL): Any
Max Radius/Reach (R): Any
Max Safe Working Load: 10 Tonnes
Max Slewing Angle: 270°
Slewing Operation Options: Manual, Motorised
Articulated/Knuckle Arm: Available
Paint Finishes Available: Any
Floor Fixings Available: Holding Down Bolts, Resin Anchor Bolts (suitable concrete thickness required)
Our 360° jibs offer complete circular slewing access. Using a slight alteration of our underbraced post jib design, these systems provide either manually operated or motorised continuous rotation. We typically specify this model of jib for any slewing angle requirement that's greater than 270°.

Max Height of Lift (HL): Any
Max Radius/Reach (R): Any
Max Safe Working Load: 10 Tonnes
Max Slewing Angle: 360°
Slewing Operation Options: Manual, Motorised
Articulated/Knuckle Arm: Unavailable
Paint Finishes Available: Any
Floor Fixings Available: Holding Down Bolts, Resin Anchor Bolts (suitable concrete thickness required)
Wall jibs are attached directly to a column or wall, removing the need for (and cost of) the jib post. We offer both overbraced and underbraced wall jibs cranes (underbraced shown above).

As with our post jibs we would typically specify an overbraced wall jib for lighter applications and recommend an underbraced model for heavier loads or when maximising headroom is important. But as ever we can tailor any wall mounted jib crane to meet your precise requirements.

Max Height of Lift (HL): Any
Max Radius/Reach (R): Any
Max Safe Working Load: 10 Tonnes
Max Slewing Angle: Typically 180° (but can be as much as 270° if attached to column instead of a wall)
Slewing Operation Options: Manual, Motorised
Articulated/Knuckle Arm: Available (underbraced models only)
Paint Finishes Available: Any
Wall Fixings Available: Face fixing bolts, Wrap-around stay bolts (columns only, no drilling into building walls or columns required)
Knuckle jibs utilise an articulated arm and are typically used for reaching around obstacles within a workplace. We offer both wall and post mounted knuckle jibs (post mounted shown above), but both are only available with underbraced designs.

Max Height of Lift (HL): Any
Max Radius/Reach (Ra+Rb): 3 metres
Max Safe Working Load: 1 Tonne
Max Slewing Angle: 270°
Available On Which Jib Models: Post Jibs, Wall Jibs
Available With Which Bracing Types: Underbraced Only
Slewing Operation Options: Manual, Motorised
Paint Finishes Available: Any
Floor Fixings Available: Holding Down Bolts, Resin Anchor Bolts (suitable concrete thickness required)
Our travelling jibs run up and down wall mounted gantry rails allowing them to cover a larger lifting area. We offer both manual and powered travel motions on these modified wall jib cranes.

We offer fixed arm designs or 180° slewing angles on standard models, but can also produce special 360° designs. As ever we can tailor any travelling jib crane to meet your precise requirements.

Max Height of Lift (HL): Any
Max Radius/Reach (R): Any
Max Safe Working Load: 10 Tonnes
Max Slewing Angle: Typically fixed or 180° (but can be as much as 360° on special designs.)
Slewing Operation Options: Manual, Motorised
Long Travel Distance: Any
Paint Finishes Available: Any
CAPTCHA
Comments
This field is for validation purposes and should be left unchanged.

Wall jib crane mounting methods

We offer two fixing methods for our wall jib crane range – face fixing bolts and wrap around bolts.

Face fixing means the wall jib crane is attached drirectly to the building column or wall, whereas wrap around bolts involved ‘strapping’ the mounting around a column to provide the necessary strength to support the wall jib.

At the quotation stage of every enquiry we receive we detail the suitable loadings the crane will apply to your existing structure, which will allow you to check the suitability of the wall or building column at your site.

Bespoke wall jib cranes

Every element of a Pelloby wall mount jib crane can be fully tailored to suit your specific needs. Optional parking locks can be incorporated as an additional safety feature, while hoist canopies and galvanised finishes are available for outdoor use. You can choose from a variety of paint options to let you or your customers reflect their brand colours.

To receive a wall mounted jib crane quotation call us on 01952 586626 or email sales@pelloby.com.

Pelloby Jib Crane Brochure

Click the image on the right to view our jib brochure for an overview of our design and manufacturing capabilities in this area.

This brand new brochure outlines the types of jibs available and the follow up support offered by our service department.